You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Esri article doesn't explain how to become a root for the AWS Marketplace instance that runs Ubuntu. This guide is useful for post-installation steps.

Step-by-step guide

Use ubuntu username instead of arcgis.

  1. ssh -i ~/.ssh/Joe-SDT.pem ubuntu@35.175.212.218
  2. sudo -i
  3. apt-get update


arcgis user account has no su privilege.

arcgisserver.service

  Although the Esri guide says that the service file needs to be copied over, it is already installed.

root@ip-172-31-49-200:~# diff /arcgis/server/framework//etc/scripts/arcgisserver.service /etc/systemd/system/arcgisserver.service 
4,25d3
< #
< # Configure ArcGIS Server to be started at boot on Linux distributions 
< # adopting systemd init system (For example RHEL 7.x and SuSE12) by 
< # following these instructions:
< #
< # 1.) Switch to the root user.
< #
< # 2.) Copy this file to /etc/systemd/system
< #
< # 3.) Enable the service to start at boot:
< #
< #     # systemctl enable arcgisserver.service
< #
< # 4.) Verify systemd service is setup correctly:
< #
< #    # systemctl stop arcgisserver.service
< #    # systemctl start arcgisserver.service
< #    # systemctl status arcgisserver.service
< #
< # 5.) Reboot the system and verify that Server restarts properly.
< #
< # ------------------------------------------------------------------
34,39d11
< GuessMainPID=false
< 
< # The minimum number of processes need to be set to 25059 or higher.  Enable
< # and raise this limit if it is a heavily used system.  Use ulimit -Su -Hu to
< # check current values.
< # LimitNPROC=25059
41,49c13,14
< 
< # To prevent any one service from spawning too many threads and consuming all
< # server resources, systemd v228 and beyond included in SLES12 SP2 and higher
< # set the maximum number of threads to be created at 512.  Users on SLES12 may
< # need to enable and raise this limit if it is a heavily used system.  Use
< # "systemctl show --property DefaultTasksMax" to check the current value.  To
< # find the version of systemd, use "systemctl --version".
< # TasksMax=512
< 
---
> LimitNPROC=25059
> GuessMainPID=false
51a17
> Environment="arcgis_cloud_platform=aws"
55d20
<

However, it is not active.

root@ip-172-31-49-200:~#  systemctl status arcgisserver.service
● arcgisserver.service - ArcGIS Server Service
   Loaded: loaded (/etc/systemd/system/arcgisserver.service; disabled; ven
   Active: inactive (dead)

Enable it.

root@ip-172-31-49-200:~# systemctl enable arcgisserver.service
Created symlink /etc/systemd/system/multi-user.target.wants/arcgisserver.service → /etc/systemd/system/arcgisserver.service.



  • No labels